|
Treatment by thermal ablation – The benchtop model | |
There are essentially two varieties of thermal ablator – a benchtop model and a battery-driven portable model. The benchtop model (also known as Semm’s cold coagulator) runs on electricity and weighs around 3.5 Kg. The operation/ use of the instrument is quite simple and is very convenient.
The front panel of the machine has a switch to turn the machine on and off, a temperature adjustment knob to set the temperature, a temperature display, and a timer (optional). There is a handheld thermal probe with a metallic shaft and a heating plate at the tip. The diameter of the tip is 19 mm, which may be flat or with a small nipple at the center. The probe is connected to the front of the main unit with a cable.
Setting up the benchtop ablator (click on the images to see the steps):
|
Click on the pictures to magnify and display the legends
IARC, 150 Cours Albert Thomas, 69372 Lyon CEDEX 08, France - Tel: +33 (0)4 72 73 84 85 - Fax: +33 (0)4 72 73 85 75 © IARC 2024 - All Rights Reserved.
|